Mazda 2: Cruise Control

With cruise control, you can set and automatically maintain any speed of more than about 25 km/h (16 mph).

WARNING

Do not use the cruise control under the following conditions: Using the cruise control under the following conditions is dangerous and could result in loss of vehicle control.

Cruise Control Switch

Cruise Control Switch


Cruise Main Indicator Light (Amber)/Cruise Set Indicator Light (Green)


The indicator light has two colours.

Cruise Main Indicator Light (Amber)

The indicator light illuminates amber when the cruise control system is activated.

Cruise Set Indicator Light (Green)

The indicator light illuminates green when a cruising speed has been set.

Activation/Deactivation

With adjustable speed limiter

To activate the system, press the ON/OFF switch. The cruise main indicator light (amber) illuminates.

To deactivate the system, press the switch again.

The cruise main indicator light (amber) turns off.

Without adjustable speed limiter

To activate the system, press the ON switch. The cruise main indicator light (amber) illuminates.

To deactivate the system, press the OFF switch.

The cruise main indicator light (amber) turns off.

WARNING

Always turn off the cruise control system when it is not in use: Leaving the cruise control system in an activation-ready state while the cruise control is not in use is dangerous as the cruise control could unexpectedly activate if the activation button is accidentally pressed, and result in loss of vehicle control and an accident.

To Set Speed

  1. (With adjustable speed limiter) Activate the cruise control system by pressing the ON/OFF switch. The cruise main indicator light (Amber) illuminates.

    (Without adjustable speed limiter) Activate the cruise control system by pressing the ON switch. The cruise main indicator light (Amber) illuminates.

  2. Accelerate to the desired speed, which must be more than 25 km/h (16 mph).
  3. Set the cruise control by pressing the SET  or SET
      switch at the desired
    speed. The cruise control is set at the moment the SET  or SET
    switch is
    pressed. Release the accelerator pedal simultaneously. The cruise set indicator light (Green) illuminates.

NOTE

To Increase Cruising Speed

Follow either of these procedures.

To increase speed using cruise control switch

Press the SET switch and
hold it. Your vehicle will accelerate. Release the switch at the speed you want.

Press the SET switch and
release it immediately to adjust the preset speed.

Multiple operations will increase the preset speed according to the number of times it is operated.

Increasing speed with a single SET
switch operation

Meter display for vehicle speed indicated in km/h: 1 km/h (0.6 mph) Meter display for vehicle speed indicated in mph: 1 mph (1.6 km/h)

To increase speed using accelerator pedal

Depress the accelerator pedal to accelerate to the desired speed. Press the SET or
SET switch and release it
immediately.

NOTE

Accelerate if you want to speed up temporarily when the cruise control is on. Greater speed will not interfere with or change the set speed. Take your foot off the accelerator to return to the set speed.

To Decrease Cruising Speed

Press the SET switch and
hold it. The vehicle will gradually slow.

Release the switch at the speed you want.

Press the SET  switch
and release it immediately to adjust the preset speed.

Multiple operations will decrease the preset speed according to the number of times it is operated

Decreasing speed with a single SET
switch operation

Meter display for vehicle speed indicated in km/h: 1 km/h (0.6 mph) Meter display for vehicle speed indicated in mph: 1 mph (1.6 km/h)

To Resume Cruising Speed at More Than 25 km/h (16 mph)

If some other method besides the OFF switch was used to cancel cruising speed (such as applying the brake pedal) and the system is still activated, the most recent set speed will automatically resume when the RESUME switch is pressed.

If vehicle speed is below 25 km/h (16 mph), increase the vehicle speed up to 25 km/h (16 mph) or more and press the RESUME switch.

To Temporarily Cancel

To temporarily cancel the system, use one of these methods:

If the RESUME switch is pressed when the vehicle speed is 25 km/h (16 mph) or higher, the system reverts to the previously set speed.

To Deactivate

With adjustable speed limiter

To deactivate the system, press the ON/ OFF switch.

Without adjustable speed limiter

To deactivate the system, press the OFF switch.

READ NEXT:

 Tyre Pressure Monitoring System

The Tyre Pressure Monitoring System (TPMS) monitors the air pressure of all four tyres. If the air pressure of one or more tyres is too low, the system warns the driver by indicating the tyre pr

 Diesel Particulate Filter (SKYACTIV-D 1.5)

The diesel particulate fi lter collects and removes most of the particulate matter (PM) in the exhaust gas of a diesel engine. PM collected by the diesel particulate fi lter is cleared during no

 Rear View Monitor

The rear view monitor provides visual images of the rear of the vehicle when reversing. WARNING Always drive carefully confi rming the safety of the rear and the surrounding conditions by looki

SEE MORE:

 Master Cylinder

MASTER CYLINDER REMOVAL/INSTALLATION CAUTION: When removing/installing the master cylinder, avoid touching the primary piston with your hand when not necessary. Otherwise, it could damage the master cylinder. 1. Remove the battery. (See BATTERY REMOVAL/INSTALLATION). 2. Remove in the order i

 Aerial

Embedded Type * The aerial is embedded into the window glass. CAUTION When washing the inside of the window which has an aerial, use a soft cloth dampened in lukewarm water, gently wiping the aerial lines. Use of glass cleaning products could damage the aerial. Detachable Type To remove

© 2016-2023 Copyright www.ma2auto.com