Mazda 2: Emergency Operation for Starting the Engine

Mazda2 DJ 2014–2023 Owners Manual / When Driving / Start/Stop Engine / Starting the Engine / Emergency Operation for Starting the Engine

If the KEY warning light (red) illuminates, or the push button start indicator light (amber) fl ashes, this could indicate that the engine may not start using the usual starting method. Have your vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer as soon as possible. If this occurs, the engine can be force-started. Press and hold the push button start until the engine starts.

Other procedures necessary for starting the engine such as having the key in the cabin, and depressing the clutch pedal (manual transaxle) or the brake pedal (automatic transaxle) are required.

READ NEXT:

 Turning the Engine Off

WARNING Do not stop the engine while the vehicle is moving: Stopping the engine while the vehicle is moving for any reason other than in an emergency is dangerous. Stopping the engine while the

 i-stop

The i-stop function automatically stops the engine when the vehicle is stopped at a traffi c light or stuck in traffi c, and then restarts the engine automatically to resume driving. The system

 Instrument Cluster and Display

SEE MORE:

 Brake Fluid

BRAKE FLUID INSPECTION 1. Verify that the brake fluid level in the reserve tank is between the MAX and MIN marks. If the brake fluid level is below the MIN mark, add brake fluid. BRAKE FLUID AIR BLEEDING CAUTION: Keep the fluid level in the reservoir at 3/4 full or more during the air blee

 Precaution

Intermittent Concern Troubleshooting Vibration method If malfunction occurs or becomes worse while driving on a rough road or when the engine is vibrating, perform the steps below. NOTE: There are several reasons why vehicle or engine vibration could cause an electrical malfunction. Some of th

© 2016-2023 Copyright www.ma2auto.com