Mazda 2: Hazard Warning Flasher
The hazard warning lights should always
be used when you stop on or near a
roadway in an emergency.

The hazard warning lights warn other
drivers that your vehicle is a traffi c hazard
and that they must take extreme caution
when near it. 
Depress the hazard warning fl asher and
all the direction indicators will fl ash. The
hazard warning indicator lights in the
instrument cluster fl ash simultaneously.
NOTE
- The direction indicators do not work
when the hazard warning lights are
on.
- Check local regulations about the use
of hazard warning lights while the
vehicle is being towed to verify that
it is not in violation of the law.
- If the brake pedal is depressed
while driving on slippery roads, the
emergency stop signal system could
operate causing all the turn and lane
change signals to fl ash. Refer to
Emergency Stop Signal System on
page 4-80 .
- While the emergency stop signal
system is operating, all the direction
indicators automatically fl ash rapidly
to caution the driver of a vehicle
following behind your vehicle of a
sudden braking situation. Refer to
Emergency Stop Signal System on
page 4-80 .
READ NEXT:
Foot Brake
This vehicle has power-assisted brakes
that adjust automatically through normal
use.
Should power-assist fail, you can stop by
applying greater force than normal to the
brake pedal.
Your Mazda is equipped with an
emergency stop signal system that is
designed to determine whether you are
depressing the brake pedal with greater
force than during normal braking such
as in a sit
SEE MORE:
Categories of Child-Restraint Systems
NOTE
When purchasing, ask the manufacturer of the child-restraint system which
type of childrestraint
system is appropriate for your child and vehicle.
(Europe)
Child-restraint systems are classifi ed into the following 5 groups according
to the UNECE
If the CAN system is considered to be the cause of the malfunction based
on the repair order form and
the malfunctioning symptom, follow the Troubleshooting Procedure.
DTCs are also output due to a control module or sensor malfunction, or
incorrect power supply. Verify
the output DTCs and f
© 2016-2023 Copyright www.ma2auto.com
