Mazda 2: Traction Control System (TCS)

Mazda2 DJ 2014–2023 Owners Manual / When Driving / ABS/TCS/DSC / Traction Control System (TCS)

The Traction Control System (TCS) enhances traction and safety by controlling engine torque and braking. When the TCS detects driving wheel slippage, it lowers engine torque and operates the brakes to prevent loss of traction.

This means that on a slick surface, the engine adjusts automatically to provide optimum power to the drive wheels, limiting wheel spin and loss of traction.

The warning light turns on when the system has a malfunction.

Refer to Warning Lights on page 4-38 .

WARNING

Do not rely on the Traction Control System (TCS) as a substitute for safe driving: The Traction Control System (TCS) cannot compensate for unsafe and reckless driving, excessive speed, tailgating (following another vehicle too closely), and hydroplaning (reduced tyre friction and road contact because of water on the road surface). You can still have an accident.

Use snow tyres or tyre chains and drive at reduced speeds when roads are covered with ice and/or snow: Driving without proper traction devices on snow and/or ice-covered roads is dangerous. The Traction Control System (TCS) alone cannot provide adequate traction and you could still have an accident.

NOTE

To turn off the TCS, press the DSC OFF switch (page 4-85 ).

TCS/DSC Indicator Light


This indicator light stays on for a few seconds when the ignition is switched ON. If the TCS or DSC is operating, the indicator light fl ashes.

If the light stays on, the TCS, DSC or the brake assist system may have a malfunction and they may not operate correctly. Take your vehicle to an expert repairer, we recommend an Authorised Mazda Repairer.

NOTE

READ NEXT:

 Dynamic Stability Control (DSC)

The Dynamic Stability Control (DSC) automatically controls braking and engine torque in conjunction with systems such as ABS and TCS to help control side slip when driving on slippery surfaces, or

 i-ELOOP

i-ELOOP is a regenerative braking system. When you depress the brake pedal or use engine braking, the kinetic energy that occurs is converted to electrical energy by the power generator and the

 Fuel Economy Monitor

For vehicles with type C/type D audio, the Control Status, Fuel Consumption, and Effectiveness are switched and displayed by operating each icon in the display. In addition, after completing a t

SEE MORE:

 Rear Axle

REAR AXLE LOCATION INDEX Rear axle component REAR AXLE INSPECTION Wheel Bearing Play Inspection 1. Inspect the wheel bearing play in the same way as the front axle. (See WHEEL HUB, STEERING KNUCKLE INSPECTION). If it exceeds the specification, replace the wheel hub component. (See WHEEL HUB

 Fuel Pump Unit

FUEL PUMP UNIT REMOVAL/INSTALLATION WARNING: Fuel is very flammable liquid. If fuel spills or leaks from the pressurized fuel system, it will cause serious injury or death and facility breakage. Fuel can also irritate skin and eyes. To prevent this, always complete the "Fuel Line Safety Proc

© 2016-2023 Copyright www.ma2auto.com