Mazda 2: General Procedures
Mazda 2 2007-2014 Service Manual / Steering / General Procedures
WARNING:
- Always inspect the steering component carefully for any shock or impact which may have occurred during a collision or servicing operation. If a damaged part or a part suspected of being damaged is used, it could result in an unexpected accident due to the steering mechanism being inoperative. Always replace the damaged part or part suspected of being damaged.
- If the steering mechanism is turned from lock to lock continuously or
the steering rack
terminal limit is reached repeatedly, such high-load steering action
increases the
temperature of the steering column (to approx. 85
READ NEXT:
Steering Location Index
Steering wheel and column
(See STEERING WHEEL AND COLUMN INSPECTION.)
(See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION.)
Steering shaft
(See STEERING SHAFT INSPECTION.)
EPS CM
Steering Wheel and Column
STEERING WHEEL AND COLUMN INSPECTION
Play inspection
1. With the wheels in the straight-ahead position, start the engine.
2. Turn the steering wheel to the left and right gently, then verify that the
Intermediate Shaft
INTERMEDIATE SHAFT REMOVAL/INSTALLATION
WARNING:
The steering column (EPS motor) temperature increases directly after
continuous
turning of the steering mechanism which could cause burns if it is
SEE MORE:
Bluetooth® Hands-Free (Type A/Type B)
Making a Call
Phonebook Usage
Telephone calls can be made by saying
the name of a person (voice tag) whose
phone number has been registered in
Bluetooth® Hands-Free in advance. Refer
to Phonebook registration.
Press the pick-up button or talk button
with a short press.
Say: [Beep] “
Door Lock Switch
DOOR LOCK SWITCH REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the console panel. (See REAR CONSOLE REMOVAL/INSTALLATION).
3. Remove the screws.
4. Disconnect the door lock switch connector.
5. Install in the reverse order of removal.
DOOR LOCK SWITCH INSPECTION
1. In
© 2016-2023 Copyright www.ma2auto.com
