Mazda 2: Suspension
Mazda 2 2007-2014 Service Manual / Suspension
- Tire Pressure Monitoring System (TPMS)
- Malfunctioning Wheel Unit Identification
- Precaution
- Symptom Troubleshooting
- General Procedures
- Wheel Alignment Pre-inspection
- Wheel and Tire Specification
- Wheel Unit ID Registration
- Front Suspension
- Rear Suspension
READ NEXT:
Tire Pressure Monitoring System (TPMS)
TIRE PRESSURE MONITORING SYSTEM (TPMS) WIRING DIAGRAM
TIRE PRESSURE MONITORING SYSTEM (TPMS) ON-BOARD DIAGNOSIS
On-Board Diagnostic (OBD) Test Description
The OBD test inspects the integrity and fu
Malfunctioning Wheel Unit Identification
NOTE:
The tire pressure monitoring system (TPMS) does not identify the
location of the
malfunctioning wheel unit on the vehicle (RF, LF, LR, RR). The TPMS
identifies each
wheel unit as No.1, N
Precaution
Intermittent Concern Troubleshooting
Vibration method
If malfunction occurs or becomes worse while driving on a rough road or when
the
engine is vibrating, perform the steps below.
NOTE:
There are
SEE MORE:
Input/Turbine Speed Sensor
INPUT/TURBINE SPEED SENSOR INSPECTION
CAUTION:
Water or foreign objects entering the connector can cause a poor
connection or
corrosion. Be sure not to drop water or foreign objects on the connector
when
disconnecting it.
On-Vehicle Inspection
1. Disconnect the input/turbine speed sensor co
Immobilizer System
The immobilizer system allows the
engine to start only with a key the system
recognises.
If someone attempts to start the engine
with an unrecognised key, the engine
will not start, thereby helping to prevent
vehicle theft.
If you have a problem with the
immobilizer system or the key, co
© 2016-2023 Copyright www.ma2auto.com
