System Malfunction Location
Detection Condition
WARNING:
Detection conditions are for understanding the DTC outline before
performing an inspection.
Performing an inspection according to only t
System Malfunction Location
Detection Condition
WARNING:
Detection conditions are for understanding the DTC outline before
performing an inspection. Performing an
inspection according to only th
System Malfunction Location
Detection Condition
WARNING:
Detection conditions are for understanding the DTC outline before
performing an
inspection. Performing an inspection according to only th
KNOCK SENSOR (KS) REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the intake manifold. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION).
3. Disconnect the KS connector.
4. Remove the KS using the SST
5. Install in the reverse order of removal.
KNOCK SENSOR (KS) INSPECTION
1.
POWER BRAKE UNIT INSPECTION
NOTE:
The following inspection methods are simple inspection methods to judge
the function
of the power brake unit.
If there is any malfunction in the power brake unit, replace the power
brake unit as a
single component.
Without Using SST
Operation inspection
1.